Waterborne nano self-cleaning coating

Waterborne nano self-cleaning coating

Product Details

First, the product features:

1. Excellent hydrophobicity and oleophobicity, the contact angle of water droplets on the surface of TM-002 coating is ≥107°, and the contact angle of edible peanut oil on the exterior of the coating is ≥90°.

2. Excellent self-cleaning function, such as: handwriting marked on the exterior of the paint with oily or water-based marker, can not easily write or write handwriting, wipe it clean with paper towel or dry cloth, and this self-cleaning function The durability is very good.

3. Long weather resistance, the weather resistance of TM-002W coating is Quv ≥ 1000h.

4. Excellent chemical resistance, resistant to 5% nitric acid ≥ 48h, 5% NaoH solution ≥ 48h, neutral salt spray ≥ 168h.

5. High wear resistance, the hardness of the coating can reach more than 5H, and the resistance of 0000# steel wool 500g can pass 100 times.

6. The coating has excellent adhesion to metal and inorganic substrates.

7. Good resistance, positive and negative impact, 90° bending, no abnormal film.

8. Anti-acetone scrub ≥ 300 times, alcohol-resistant scrub ≥ 500 times.

9. Pure water, zero VOC, no heavy metals and EU banned ingredients.

Second, the use of:

1. Used in stainless steel, aluminum alloy, copper, color steel products and elevator appearance.

2. Fine wall clock, medical equipment and other exterior painting.

3. Rail transit and urban public facilities, kitchen and bathroom products.

Third, the operation notes:

1. The paint belongs to the direct application type. It needs to be evenly stirred before application. It is sprayed with an air spray gun with a diameter of 0.15 or 0.2mm. The air pressure is 3-4 Pa and the gun distance is generally about 15-25 cm.

2. The sprayed film should be allowed to stand for about 15 minutes, and gradually baked at a temperature of 170 ± 5 ° C. The time is usually 30 minutes.

3. Since the coating is a low surface energy product, it cannot be recoated. If recoating is required, it is necessary to clean the surface of the coating.

Fourth, storage and packaging:

1. Please keep the package sealed and store in a dry and ventilated place. Please place it with other volatile chemicals to avoid absorption of these materials by the nanomaterial.

2. Packing: 5kg/20kg/barrel