Environmentally friendly water-based glass bottle paint
- 2018-11-01-

[product parameters]

Product specifications: 25KG, 50KG plastic bucket

Solvent type: water-based environmentally friendly paint

Paint color: can be color (solid / translucent / metallic paint)

Thinner: pure water or filtered tap water

Dilution share: 1 (paint): 0.1~0.2 (water) according to product and coating condition conditioning

Baking temperature: 170~180°C According to the size of the workpiece and the conditioning

Baking time: 20min~25min

Adhesion: 0 grade (100 grid method, 3M adhesive tape)

Pencil hardness: 4H

Salt spray resistance: 48h

RCA wear resistance: 300 times

Construction method: manual spraying, active spraying

Storage period: 6 months

【Product Features】

1. Green, non-toxic, non-polluting, convenient construction

2. The paint film is full, high gloss, bright color, high hardness and good patience

3. Water-resistant soaking, boiling-resistant, acid and alkali resistant, alcohol resistant

[Use scale]

Glass bottle special water bottle paint


Single layer construction:

1. When using, first participate in the company's supporting magnetizing agent according to 1.5%, fully mix evenly

2. Adjust the viscosity of the paint, you can participate in the pure water share, 1:0.1~0.2 (paint: water), or you can dilute without adding water, mix evenly

3. After filtering the debris or bubbles with a mesh of 200 mesh or more, spray it; after spraying, let it level for 3~5 minutes, then put it into the oven for progressive baking. The temperature reaches 170~180°C and the temperature is constant for 30 minutes. Cooling out of the product;

Multi-layer construction:

1. Primer construction method refers to single layer construction method;

2. If the primer is to be decaled, the primer should be baked, the temperature is slightly lower, 150-160 degrees constant temperature for 10-20 minutes, no sticky, slightly resistant to water, then paste the paper, then apply the finish Processing, the method is the same as above.

3. If the primer is not decaled, it can be wet and wet, and the primer is painted. After a few minutes of drying, you can immediately apply the topcoat. After spraying, it can be placed in the oven for a few minutes. After progressive baking to 170-180 degrees, the temperature can be lowered for 20-30 minutes to cool the baked product.

4. Tianmai chemical water bottle paint with full paint film, bright color, smoothness, high hardness, strong adhesion, yellowing resistance, water resistance, acid resistance, alkali resistance, aging resistance, abrasion resistance and chemical resistance. Strong UV resistance, non-fading and durability, excellent decorative and protective, convenient construction, etc.

Pay special attention to the handling of the gun distance and air pressure. After the entire surface is sprayed, there will be no exposed bottom and oil flow. For different product functional requirements, please refer to the company's "Construction Flow Chart" for details.

Water-based baking type bottle paint